Minimum Order Quantity | 1 Piece |
Voltage (volt) | 11000 |
Rated Voltage | 11&6.6kV |
Voltage | 11 &6.6kV |
Number of Poles | 1 Pole |
Current | 400A |
Model Number | CS-VP11 |
Brand | Crompton Grevease |
Electricity Type | AC |
Condition | New |
Vacuum Contactor Technology
A "Vacuum Contactor" is a "Switching device" that "makes and breaks"
the electrical current inside a chamber called "Vacuum Interrupter Tube"
(VI).
A Vacuum Interrupter is a sealed-off device with a level of vacuum
>10-5 torr.
VI. At current zero the arc ceases & the circuit voltage is isolated
contacts.
The special contact material used in the VI, ensure low chopping current
& switching over voltage, thus enhances the life of connected load. Viz.
Motors, Transformers, Capacitors etc.
Minimum Order Quantity | 1 Unit |
Model Name/Number | MVC400 |
Brand | Crompton Greaves |
Voltage | 6.6kV & 12kV |
Phase | Three Phase |
I Deal In | New Only |
Country of Origin | Made in India |
We are a leading Crompton Greaves Authorized Wholesale Dealer for Crompton make Vacuum Contactor 6.6KV, 400Amp, MVC-400S, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 3Pole, Elect Latch, MVC-400, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 2Pole, Elect Latch, MVC-400D, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 1Pole, Elect Latch, MVC-400S, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 3Pole, Mech Latch, MVC-400L and CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 2Pole, Mech Latch, MVC-400LD
Salient Features
Vacuum Contactor and Medium Voltage Vacuum
Contactor
Wide range - Rated Voltage 415V-12kV, Rated Current upto 1000A,
STC upto 10kA for 1Sec., AC-4 Duty Compliant
VC with higher BIL i.e. PFHV-38kVrms & Impulse-95kVp available
for high altitude requirements
Flexibility to configure VC in case of change in control voltage even
at site without changing control coils
Option for selecting No. of Poles i.e. 1/2/3 & Latching Mode i.e.
Electrical / Mechanical, for specific applications like Neutral
Grounding, Soft Starters etc.
Epoxy Encapsulated VI Pole enables Higher Insulation & makes VC
Compact & Cost effective to integrate
Low chopping current - No requirement of surge suppressor for
inductive switching overvoltages
Comes with smart & ready to use Voltage Control Card - Less
control wiring & improved Customer Convenience
Very high reliability due to a minimum no. of dynamic components in
VC Mechanism
High mechanical and electrical life & Low maintenance
Rugged structure for higher reliability in harsh dusty-corrosive
atmosphere
In-House R&D enables continuous improvement & development of
VC
Fully Type Tested
Certified with latest QMS (ISO 9001-2008), EMS (ISO 14001-
2004) & OHSAS (BS 18001-2007)
VCs compliant to latest IEC 60947 & IEC 62271-106
Low Voltage Vacuum Contactor
Model Nos. VC-630-3A VC-1000-3A
Type Details
Mechanism Type 630A 1000A
Electrical Latch
(Solenoid to Close-Open &
Hold)
VC-630-3A VC-1000-3A
Ordering Information - 1. Rated Voltage, Rated Current, STC
Rating, 2. Control Voltage, 3. Application Details
Power
Minimum Order Quantity | 1 Piece |
Model Name/Number | MVC400 |
Number Of Poles | 3 |
Brand | Crompton Greaves Ltd |
Phase | Three Phase |
I Deal In | New Only |
Country of Origin | Made in India |
We are a leading Crompton Greaves Authorized Wholesale Dealer for Crompton make Vacuum Contactor 6.6KV, 400Amp, MVC-400LS, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 3Pole, Elect Latch, MVC-400, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 2Pole, Elect Latch, MVC-400D, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 1Pole, Elect Latch, MVC-400S, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 3Pole, Mech Latch, MVC-400L and CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 2Pole, Mech Latch, MVC-400LD
Salient Features
Vacuum Contactor and Medium Voltage Vacuum
Contactor
Wide range - Rated Voltage 415V-12kV, Rated Current upto 1000A,
STC upto 10kA for 1Sec., AC-4 Duty Compliant
VC with higher BIL i.e. PFHV-38kVrms & Impulse-95kVp available
for high altitude requirements
Flexibility to configure VC in case of change in control voltage even
at site without changing control coils
Option for selecting No. of Poles i.e. 1/2/3 & Latching Mode i.e.
Electrical / Mechanical, for specific applications like Neutral
Grounding, Soft Starters etc.
Epoxy Encapsulated VI Pole enables Higher Insulation & makes VC
Compact & Cost effective to integrate
Low chopping current - No requirement of surge suppressor for
inductive switching overvoltages
Comes with smart & ready to use Voltage Control Card - Less
control wiring & improved Customer Convenience
Very high reliability due to a minimum no. of dynamic components in
VC Mechanism
High mechanical and electrical life & Low maintenance
Rugged structure for higher reliability in harsh dusty-corrosive
atmosphere
In-House R&D enables continuous improvement & development of
VC
Fully Type Tested
Certified with latest QMS (ISO 9001-2008), EMS (ISO 14001-
2004) & OHSAS (BS 18001-2007)
VCs compliant to latest IEC 60947 & IEC 62271-106
Low Voltage Vacuum Contactor
Model Nos. VC-630-3A VC-1000-3A
Type Details
Mechanism Type 630A 1000A
Electrical Latch
(Solenoid to Close-Open &
Hold)
VC-630-3A VC-1000-3A
Ordering Information - 1. Rated Voltage, Rated Current, STC
Rating, 2. Control Voltage, 3. Application Details
Power
Minimum Order Quantity | 1 Piece |
Model Name/Number | MVC 400 |
Mounting Type | drawout |
Rated Voltage | 7.2 or 11kV |
Brand | Crompton Greaves Ltd |
Voltage | 6.6kV & 12kV |
Number of Poles | 3 Pole |
Rated Current | 400A |
We are a leading Crompton Greaves Authorized Wholesale Dealer for Crompton make Vacuum Contactor 6.6KV, 400Amp, MVC-400LS, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 3Pole, Elect Latch, MVC-400, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 2Pole, Elect Latch, MVC-400D, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 1Pole, Elect Latch, MVC-400S, CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 3Pole, Mech Latch, MVC-400L and CG make Vacuum Contactor (VC), 6.6KV/7.2KV, 2Pole, Mech Latch, MVC-400LD
Salient Features
Vacuum Contactor and Medium Voltage Vacuum
Contactor
Wide range - Rated Voltage 415V-12kV, Rated Current upto 1000A,
STC upto 10kA for 1Sec., AC-4 Duty Compliant
VC with higher BIL i.e. PFHV-38kVrms & Impulse-95kVp available
for high altitude requirements
Flexibility to configure VC in case of change in control voltage even
at site without changing control coils
Option for selecting No. of Poles i.e. 1/2/3 & Latching Mode i.e.
Electrical / Mechanical, for specific applications like Neutral
Grounding, Soft Starters etc.
Epoxy Encapsulated VI Pole enables Higher Insulation & makes VC
Compact & Cost effective to integrate
Low chopping current - No requirement of surge suppressor for
inductive switching overvoltages
Comes with smart & ready to use Voltage Control Card - Less
control wiring & improved Customer Convenience
Very high reliability due to a minimum no. of dynamic components in
VC Mechanism
High mechanical and electrical life & Low maintenance
Rugged structure for higher reliability in harsh dusty-corrosive
atmosphere
In-House R&D enables continuous improvement & development of
VC
Fully Type Tested
Certified with latest QMS (ISO 9001-2008), EMS (ISO 14001-
2004) & OHSAS (BS 18001-2007)
VCs compliant to latest IEC 60947 & IEC 62271-106
Low Voltage Vacuum Contactor
Model Nos. VC-630-3A VC-1000-3A
Type Details
Mechanism Type 630A 1000A
Electrical Latch
(Solenoid to Close-Open &
Hold)
VC-630-3A VC-1000-3A
Ordering Information - 1. Rated Voltage, Rated Current, STC
Rating, 2. Control Voltage, 3. Application Details
Power